Skills Insert 1: Study Project B

I have a few cute A-line skirts from Madewell that I’ve always loved wearing for fall. Unfortunately, two of them are now too big for me. So for this study project, I wanted to recreate that mini A-line shape and draft a versatile pattern that I could re-use in multiple ways. The overall vibe I was going for was corduroy, utility pockets, long walks through the leaves, Short Skirt/Long Jacket…you get the idea.

The prompt for Study Project B is:

Use your newly drafted A-line skirt block and waistband muslins to design and sew an A-line skirt with a waistband and zipper closure. The waistband may be straight or shaped, and can be any reasonable width. The skirt can be shortened or lengthened to fit the desired design, but should retain an A-line or flared shape. The design should include a straightforward in-seam or patch pocket.

After playing around in muslin (i.e., thrifted bedsheets) with different waistline shapes and widths, I was excited to put my new skills and specs to the test.

What I did:

  • Used my A-line skirt block as a starting point, bringing in the front and back waistline to reduce the waist circumference to 29” (about 1” ease)
  • Shortened the upper edge by 1 3/4" to account for the curved waistband
  • Shortened the length to 16”
  • Drafted a 1 3/4" curved waistband using the slash and spread method to make the upper curve 29” and have the lower curve match the new measurements of my skirt
  • Added 1 1/4" hem allowance plus a 3/8” fold
  • Added 5/8” seam allowances
  • Drafted a patch pocket matching the upper and side edges of my front skirt piece
Finished mini skirt in 7oz cotton
Finished mini skirt in 7oz cotton
My pinterest inspo

I’m extremely happy with the final product, although it’s a tiny bit longer and wider than I was hoping for. I added an optional seam allowance in the front to provide the opportunity for a topstitching detail and the result turned out great. The pockets are nice and roomy, and my calculations for the waistband were nearly spot on. Interestingly, my final waist measurement ended up being 29.5”, even though I double triple checked my math. I’m wondering if the turndown of the upper waistband edge added a tiny bit of length.

After sewing my first sample, I decided to make a few adjustments for later:

  • I shortened the skirt length another 1”
  • I trimmed the back waistline by ½” to balance the side seam (I might also transfer this tweak to my skirt block if it becomes a recurrent issue)
  • I re-drafted the patch pockets to be ½” smaller on each side and adjusted the skirt notches accordingly

I plan to sew the next sample in a lovely fall corduroy, so stay tuned!

- M.J.